 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Features * * * * * * * * * 1.3V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed 1.5V / 1.8V / 2.5V / 2.8V/ 3.0V / 3.3V / 3.5V / 5.0V Lead Free Package: SOT89-3L SOT89-3L: Available in "Green" Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) General Description AP1115 is a low dropout positive adjustable or fixed mode regulator with 0.6A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. AP1115 is also well suited for other applications such as VGA cards. AP1115 is guaranteed to have <1.3V dropout at full load current making it ideal to provide well regulated outputs of 1.25V to 5V with up to 18V input supply. Applications * * PC Peripheral Communication Ordering Information AP1115 X Y XX X - 13 Pin Version A : Pin1 : VOUT 2 : Adj(GND) 3 : VIN B : Pin1 : Adj(GND) 2 : VIN 3 : VOUT Package Y : SOT89-3L Vout Blank : ADJ 15 : 1.5V 18 : 1.8V 25 : 2.5V 28 : 2.8V 30 : 3.0V 33 : 3.3V 35 : 3.5V 50 : 5.0V Lead Free L : Lead Free G : Green Packing 13 : Tape & Reel Device Lead-free AP1115XYXX-L-13 AP1115XYXX-G-13 Notes: Package Code Y Y Packaging (Note 2) SOT89-3L SOT89-3L 13" Tape and Reel Quantity Part Number Suffix 2500/Tape & Reel -13 2500/Tape & Reel -13 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. AP1115 Rev. 7 1 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Pin Assignments (1) AP1115A (2) AP1115B ( Top View ) ( Top View ) 3 2 1 VIN Adj (GND) VOUT Tab is VIN SOT89-3L 3 2 1 VOUT VIN Adj (GND) Tab is Adj (GND) SOT89-3L Pin Descriptions Pin Name Adjj (GND) VOUT I/O I O Description A resistor divider from this pin to the VOUT pin and ground sets the output voltage (Ground only for Fixed-Mode). The output of the regulator. A minimum of 10uF capacitor (0.15 ESR 20) must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor (0.15 ESR 20) is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than VOUT in order for the device to regulate properly. VIN I AP1115 Rev. 7 2 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Typical Circuit 5V C1 100uF VIN GND VOUT 3.3V/0.5A C2 100uF VIN Adj VOUT R1 121 R2 121 5V C1 100uF VO 2.5V/0.5A C2 100uF AP1115 A (5V/3.3V Fixed Output) AP1115 A (5V/2.5V Adj Output) 5V C1 100uF VOUT VIN GND 3.3V/0.5A C2 100uF 5V C1 100uF VO VOUT VIN Adj R2 121 2.5V/0.5A C2 R1 121 100 uF AP1115 B (5V/3.3V Fixed Output) AP1115B (5V/2.5V Adj Output) Note : Vo = VREF x (1+ R 2 ) R1 Absolute Maximum Ratings Symbol VIN PD TST TMJ Parameter DC Supply Voltage Power Dissipation Storage Temperature Maximum Junction Temperature Rating -0.3 to 18 V Internally Limited -65 to +150 150 Unit V mW o C o C Recommended Operating Conditions Symbol TOP Parameter Operating Junction Temperature Range Min 0 Max 125 Unit o C AP1115 Rev. 7 3 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Electrical Characteristics Parameter Reference Voltage AP1115-ADJ AP1115-1.5 AP1115-1.8 AP1115-2.5 AP1115-2.8 Output Voltage AP1115-3.0 AP1115-3.3 AP1115-3.5 AP1115-5.0 Line Regulation AP1115-XXX AP1115-ADJ AP1115-1.5 AP1115-1.8 AP1115-2.5 Load Regulation AP1115-2.8 AP1115-3.0 AP1115-3.3 AP1115-3.5 AP1115-5.0 Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current (Note 5) Thermal Regulation Notes: (Under Operating Conditions) Conditions TA = 25oC, (VIN - OUT) = 1.5V IO = 10mA o IOUT = 10mA, TA = 25 C, 3V VIN 12V o IOUT = 10mA, TA = 25 C, 3.3V VIN 12V o IOUT = 10mA, TA = 25 C, 4V VIN 12V o IOUT = 10mA, TA = 25 C, 4.3V VIN 12V IOUT = 10mA, TA = 25oC, 4.5V VIN 12V IOUT = 10mA, TA = 25oC, 4.8V VIN 12V IOUT = 10mA, TA = 25oC, 5V VIN 12V IOUT = 10mA, TA = 25oC, 6.5V VIN 12V IO = 10mA, VOUT + 1.5V < VIN < 15V, o TA = 25 C VIN = 3.3V, Vadj = 0,0mA < Io < 0.6A, o TA = 25 C (Note 3, 4) VIN = 3V, 0mA < Io < 0.6A, TA = 25oC (Note 3, 4) VIN = 3.3V, 0mA < Io < 0.6A, o TA = 25 C (Note 3, 4) VIN = 4V, 0mA < Io < 0.6A, TA = 25oC (Note 3, 4) VIN = 4.3V, 0mA < Io < 0.6A, o TA = 25 C (Note 3, 4) VIN = 5V, 0 IOUT 0.6A, o TA = 25 C (Note 3, 4) VIN = 5V, 0 IOUT 0.6A, o TA = 25 C (Note 3, 4) VIN = 5V, 0 IOUT 0.6A, o TA = 25 C (Note 3, 4) VIN = 8V, 0 IOUT 0.6A, o TA = 25 C (Note 3, 4) Min 1.225 1.470 1.764 2.450 2.744 2.940 3.235 3.430 4.900 0.7 - Typ. 1.250 1.500 1.800 2.500 2.800 3.000 3.300 3.500 5.000 12 15 20 22 23 26 28 40 1.1 5 0.008 Max 1.275 1.530 1.836 2.550 2.856 3.060 3.365 3.570 5.100 0.2 1 15 18 25 28 30 33 35 50 1.3 10 0.04 Unit V V V V V V V V V % % mV mV mV mV mV mV mV mV V A mA %/W AP1115-ADJ/1.5/1.8 = 0.6A, VOUT = 1%VOUT I 2.5/2.8/3.0/3.3/3.5/5.0 OUT AP1115-ADJ/1.5/1.8 (VIN -VOUT) = 5V 2.5/2.8/3.0/3.3/3.5/5.0 AP1115-XXX TA = 25 C, 30ms pulse o 0oC TJ 125oC 3. See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18" from the package. 4. Line and load regulation are guaranteed up to the maximum power dissipation of 5W. Power dissipation is determined by the input/output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. 5. Quiescent current is defined as the minimum output current required to maintain regulation. At 12V input/output differential the device is guaranteed to regulate if the output current is greater than 10mA. AP1115 Rev. 7 4 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Electrical Characteristics Parameter Ripple Rejection Temperature Stability (Continued) (Under Operating Conditions) JA JC Notes: Conditions f = 120Hz,COUT = 25uF Tantalum, IOUT = 0.6A AP1115-XXX VIN = VOUT+3V IO = 10mA Thermal Resistance Junction-to-Ambient (No heat sink; No air flow) (Note 6) Thermal Resistance Junction-to-Case Control Circuitry/Power Transistor (Note 6) Min - Typ. 60 0.6 164 35 Max 70 - Unit dB % o C/W C/W o 6. Test conditions for SOT89-3L: Device mounted on FR-4 substrate, 2oz copper, with minimum recommended pad layout. AP1115 Rev. 7 5 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Typical Performance Characteristics 2. 0 1. 8 0.20 Output Voltage Deviation (%) 1. 6 0 I load=600mA Dropout Voltage (V) 1. 4 1. 2 1. 0 0. 8 0. 6 0. 4 0. 2 0 0 100 200 300 400 500 600 Tj = 125 oC Tj = 25 oC -0.20 -0.40 -0.80 -1 -25 0 Dropout Voltage vs Output Current 2 1.5 0.8 1 Output Current (mA) Temperature ( oC) 25 50 75 100 125 Load Regulation vs Temperature Output Voltage Change (%) 1 0. 5 0 -0.5 -1 -1.5 -2 -50 -25 0 25 50 75 100 125 150 Output Voltage Deviation (%) 0.6 0.4 0.2 0 Percent Change in Output Voltage vs Temperature Output Voltage Deviation (mV) Input Voltage (V) Load Current (A) Output Voltage Deviation (mV) 7.5 6.5 5.5 40 20 0 -20 -40 Cin=1uF Cout=10uF Tantalum 30 20 10 0 -10 -20 2 1 0 -1 0 10 20 Temperature ( oC) 2 4 6 8 10 12 Line Regulation C in = 1uF C out = 10 uF Tantalum Preload = 100mA Input Voltage (V) 0 20 40 60 80 100 120 140 160 180 200 TIME (us) 30 40 50 60 70 80 90 100 TIME (us) Line Transient Response Load Transient Response AP1115 Rev. 7 6 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Marking Information ( Top View ) XX YWX 1 2 3 XX : Identification code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : Internal code a~z : Lead Free A~Z : Green Identification Code AP1115A AP1115B JO JU JP JV JQ JW JR JX JC JD JM JN JS JY JK JL JT JZ Output version ADJ 1.5V 1.8V 2.5V 2.8V 3.0V 3.3V 3.5V 5.0V AP1115 Rev. 7 7 of 8 www.diodes.com FEBRUARY 2009 (c) Diodes Incorporated AP1115 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Package Information (All Dimensions in mm) 1.40/1.75 Typ 1.60 1.7 2.35/2.60 Typ 2.48 3.94/4.25 0.4 1.9 1.3 1.45/1.55 Typ 1.50 2.90/3.10 Typ 3.00 80 (2x) 4.40/4.60 Typ 4.50 1.40/1.60 Typ 1.50 0.80/ 1.20 1.5 0.9 Land Pattern Recommendation (Unit: mm) 50 (2x) 0.36/0.48 0.41/0.53 0.36/0.48 Typ 0.42 Typ 0.47 Typ 0.42 0.35/0.43 Typ 0.39 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. AP1115 Rev. 7 8 of 8 www.diodes.com 2.7 FEBRUARY 2009 (c) Diodes Incorporated |
Price & Availability of AP1115
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |